Marca: YAMAHA
Categoría: Audio/Video
Tipo de Documento: Manual
Idioma: ES
Idiomas Disponibles: EN , ES
Manual para CD-S1000
Subido: 21 de noviembre de 2025 a las 18:15
Fecha de Publicación del Manual: 2008-05-01
Información de Garantía
Refer to the warranty card for details. No warranty period is explicitly stated in the provided manual pages.
Starting Test Mode: To activate TEST mode, press and hold the "PLAY" and "STOP" keys, then turn the "POWER ON/OFF" switch ON. Release the "PLAY" and "STOP" keys.
Operating Test Mode: Press the "DISPLAY" key on the remote control to cycle through various displays including firmware versions and segment tests.
Firmware Update: Connect the unit to a PC via RS232C cross cable. Use the FlashSta.exe program to load the firmware. Follow on-screen prompts for writing and verification. After update, confirm firmware version via test mode.
Solución de problemas y códigos de error
| Issue | Possible Cause | Solution |
|---|---|---|
| Product not functioning as specified. | Refer to "IMPORTANT NOTICE" and "WARNING" sections for safety and service procedures. | Ensure all service procedures are followed by authorized personnel. Check for static discharge damage. |
| Laser safety concerns during servicing. | Exposure to laser beam. | Keep eyes and skin more than 30 cm away from the laser pick-up unit. Do not stare at the laser beam. |
| Power supply hazards. | Live mains voltage present even when switched off. | Service personnel must take precautions to prevent touching live areas. |
| Firmware update issues. | Incorrect connection or procedure. | Double-check RS232C connections, software settings, and follow the update procedure precisely. Confirm firmware version after update. |