Marca:
Whirlpool
Categoría: Refrigerators
Tipo de Documento: Manual
Idioma: ES
Idiomas Disponibles: EN , ES
Manual para MSEX0105i
Subido: 21 de noviembre de 2025 a las 19:00
Información de Garantía
Refer to the warranty card for specific details; typically 24 months for parts and labor.
Product Operation Summary
This refrigerator is managed by an Electronic System. It features an LCD display for temperature control and function selection. Key functions include:
- Temperature Control: Adjust temperatures for Refrigerator (1°C to 7°C) and Freezer (-18°C to -24°C) compartments.
- Fast Cooling/Freezing: Quickly cools or freezes food.
- Vacation Mode: Saves energy during extended absences.
- 6th Sense: Automatically adjusts to usage patterns for optimal food conservation.
- Child Lock: Protects settings from accidental changes.
- Alarms: Notifies of open doors, filter replacement needs, temperature deviations, and technical failures.
The product also includes an Easy Ice system and an Anti-Bacteria filter.
Solución de problemas y códigos de error
| COMPLAINT | CHECK | SOLUTION |
| Does not Work | If the Power Cable is connected. If the wall outlet is powered. | Connect it. If not, advise the consumer to call an electrician. |
| If the circuit breaker is tripped or if the home fuse is opened. | Reset the circuit breaker or advise the consumer to call an electrician. | |
| High or Low voltage (check oscillation of lamps) | Advice the consumer to install an automatic voltage stabilizer = 1000Watts | |
| Power Cable damaged. | Replace it. | |
| If the Refrigerator was turned off by the Off key. In this situation the LCD display will be shown traces (see Use Characteristics) | Turn on the Refrigerator by the same way On key. | |
| Does Not Refrigerate / Refrigerates not much in the Refrigerator. | If the Electronic Control - PCB and Interface Board are working properly. | Check if there is electrical energy coming well until the PCB and LCD Display (Interface), through the wiring harness. Check if all interface components are working well, if not, replace the damaged component, if yes, check the Electronic Control - PCB. |
| If installation is correct (heat sources, sunshine, embedding, etc.) | Advise the consumer on the proper installation and minimum distance for embedding (10 cm on the top and 3cm on the sides). | |
| If there are any utensils blocking the wind-flow cold air outlet. | Unblock and advise the consumer. | |
| If there were excess door openings or open doors. | Advise the consumer. | |
| If the Refrigerator Temperature Set is on the proper position. | Advise the consumer. On days too hot or with the Refrigerator too full, the Temperature selection should be set to maximum position + 1 °C. | |
| Does not Freeze/ Freezing not much in the Freezer | If the evaporator is blocked by ice. | Check the defrost system: -Defrost Sensor should not be opened, in short-circuit or out of position (evaporator returning pipe) -Defrost Heater & Thermofuse are opened/ burnt or improperly positioned -The Electronic Control - PCB should be engaging the Defrost Heater, do the self test routine to prove it. Check if the Gutter or Defrosting Drain is blocked. |
| If the product is an Alarm mode. | Check orientation done on this Manual Alarm - item, regarding respective Alarm code shown on the LCD. | |
| If the Freezer Fan motor is working properly. | Check the Fan Motor, Electronic Control and their electric connectors, carring out the Self Test Routine. Finding any problem, adjust the contacts or replace the damaged component. | |
| The Sealed system operation, as leakage or restriction on the system, low compressor pumping, fluid charge and others. | Replaced the failure component and do the reoperation system. | |
| If the Electronic Control - PCB is working properly. | Check if all interface components are working well, if not, replace the damaged component, if yes, check the Electronic Control - PCB. | |
| If utensils are placed directly on the cold air outlet. | Reposition them and advise the consumer. | |
| Freezing in the Refrigerator Compartment. | If the Door Cooling is well fitted / locked at the wind flow | Fit the Door cooling to the correct position and advice the consumer about its function and the correct position after cleaning |
| If the Temperature Sets are on the proper position. | Advise the consumer: on days too cold or with few food in the Refrigerator, the Temperature selection should be set to the minimum position – 18 °C for the freezer compartment and 7°C for the refrigerator compartment. | |
| Humidity infiltration through the door. | Check for any object blocking the door closing. If gasket is defective, replace it. | |
| Ice being formed in the Freezer. | If any of the doors remains open for more than 2 minutes | Advise the consumer to close the door and explain the Open Door Alarm system to her/ him, according the Alarm system item on this Manual. |
| Alarm activated | If any Alarm code, was showed on the LCD display | Check orientation done on this Manual, regarding respective Alarm code. |
| If the Electronic Control – PCB is working properly. | Check if all interface components are working well, if not, replace the damaged component, if yes, check the Electronic Control - PCB. |