Marca: SILVER CREST
Categoría: Electronics
Tipo de Documento: Manual
Idioma: ES
Idiomas Disponibles: EN , ES
Marca: SILVER CREST
Categoría: Electronics
Tipo de Documento: Manual
Idioma: ES
Idiomas Disponibles: EN , ES
Subido: 21 de noviembre de 2025 a las 18:03
This appliance has a 3-year warranty from the date of purchase.
Initial Setup:
Inserting Discs/Media:
Playback:
| Problem | Solution |
|---|---|
| Display is blank/DVD player shows no functions even though it is switched on | A Check to see that the power cord is properly plugged into the power socket. |
| B Check to make sure that there is power at the power socket, in which you have plugged the DVD player's power cord, by connecting another appliance to the socket. If necessary plug the DVD player's power cord into another power socket. | |
| C Check to make sure that the display is not switched off by the Dimmer function. To do this press the DIMMER button on the remote control. | |
| D Switch off the DVD player by pressing the POWER button and wait ten seconds. Then switch the DVD player back on by pressing the POWER button. | |
| The display shows "No Disc" even though there is a disc inserted | A The disc is dirty, scratched or damaged. Clean the disc or insert another disc. |
| B The Country/Region code on the inserted DVD/VCD/S-VCD does not correspond to the Country/Region code of the DVD player. In this case the DVD/VCD/S-VCD cannot be played with the DVD player. | |
| Inserted disc will not playback | It is possible that a layer of condensation has built up on the DVD player's laser scan lens. This can be the case especially if the DVD player has been subjected to strong temperature fluctuations. If this is the case place the DVD player in a dry environment at normal room temperature. First remove the currently inserted disc from the disc tray. Then leave the DVD player switched off for at least one hour without using until the condensation film has evaporated. |
| No image or Black/White image only | A Check to make sure that all connection cables between the DVD player and the television (or Video projector) are firmly inserted into the corresponding sockets. |
| B Check to make sure that the settings in the OSD menu match the connections variant, with which you have connected the DVD player to the television (or Video projector). | |
| C Check by means of the televisions (or Video projectors) operating instructions to see if settings to the television (or Video projector) may be necessary in order to use the DVD player with the television. | |
| No sound | A Check to see if the television and/or the DVD player has been switched to mute. |
| B Check to see that all connecting cables between the DVD player and potentially connected audio components are firmly plugged into the corresponding sockets. | |
| C Check to make sure that the settings in the OSD menu match the connections variant, with which you have connected the audio component to the DVD player. | |
| D Check by means of the televisions operating instructions to see if settings to the television may be necessary in order to use the DVD player with the television. | |
| E Check by means of the operating instructions for a potential connected audio component if settings to it are necessary in order to use it with the DVD player. | |
| F If you ... have connected the DVD player to a stereo television and have not connected an audio component to the DVD player or have connected a Dolby Prologic compatible audio component via the analogue stereo outlet (via cinch cables to the cinch sockets L and R) of the DVD player: Check to see if you have selected the option "Large" in the OSD menu under sub menu item Front LS. | |
| No 4:3 or 16:9 image | A Check by means of the televisions operating instructions, which image formats the television has at its disposal. |
| B Check to see if the settings in the OSD menu match the available image format of the television. | |
| Remote control not functioning | A Check to make sure that the remote control batteries have been inserted into the battery compartment with the correct polarity. |
| B Check to see if the remote control batteries are exhausted and, if necessary, change both batteries. | |
| C Make sure that there are no obstacles located between the remote control and the DVD player. | |
| D Be situated no more than five meters from the DVD player when using the remote control. | |
| Playback language/ Subtitle language do not correspond to the settings in the OSD menu | The playback language/Subtitle language setting in the OSD menu is not available on the inserted disc. |
| One or several functions can not be switched on | The selected function may not be available on all DVDs/VCDs/S-VCDs! If you attempt to execute a function that is not available, the symbol is displayed on the television screen. |
| None of the buttons on the appliance or on the remote control are functioning/other malfunctions | A Switch off the DVD player by pressing the POWER button. Wait ten seconds, then press the "Power" button again once to switch the DVD player back on. |
| B If the malfunction is still present: Reset the DVD player to its default settings. For this see chapter 10.6. "Misc settings". | |
| Contact one of our service partners in your area if ... the stated function defect can not be resolved as described or other functional defects arise. For this see chapter 19. "Warranty and service". |